Implement Light Kit
Oil Caddy
SHELF-MATE
Combine Tool Boxes
ATV Tool Box
STS Combine Toolbox
Utility Tool Boxes
JD Work Center
NH/CIH Work Center
Breakaway Tractor Mirrors
K&R Home Page
|
The Work Center
Assembly Instructions
MODELS:
JNH-9512/NH: TM SERIES
JC-9510/CIH: MXM SERIES
JNH-9508/NH/CAT: GENESIS CABS
|
- Remove plastic plugs or metal setscrews in the front right-hand corner post of the cab.
- Mount 2" flat plate (A) with two metric or standard bolts & flatwashers.
- Mount main receiver tube (B) to the flat mounting plate with 2-1/2" oblts and flatwashers and lock-nuts
- Slide L-bracket (E) into receiver tube (B) using 5/16x3/8" thumb set-screw. Adjust & tighten. L-bracket will mount both long or short for your personal needs.
- Slide monitor T-bar (F) on L-bracket (E), adjust and tighten by using 5/16x38" thumb set-screw. monitor T-bar will mount with long side either right or left handed for your personal needs.
- To mount monitors, drill holes in T-bar as your equipment demands.
* PLEASE CHECK TO MAKE SURE ALL SET-SCREWS & LOCK-NUTS ARE TIGHT.
|
|
|